top of page

2512 Series T3 Shock

Updated: Aug 25, 2021


The T3, Twin Tube Technologies gas shock allow us to do a variety of things in one

shock, one is an internal check system that allows nice low speed split between compression and rebound increasing rebound open times which allow for better diver feel in the car. 2nd it allows us to do internal bypass in the tube which allows us to determine when the shock see bleed and when it don’t. By doing this we can control the amount of time which the car has right front rebound and when it allows that rebound to be released to the rear tires. This changes the balance between the front and rear of the race car allowing a bigger window of error to happen and still have great results in both the front and rear tires. IBP can be done on all 4 corners but is best done on the right front and left rear and can be done with bump zones on both corner of car. This technology is so new to the market we haven’t explored all the ways to use it yet, but we are finding more ways every day, help us to help you find new ways to win. ​​​

  •               Low drag assembly, which includes the divider, seal and main piston.

  •               Bronze coated Teflon wearband, reduces friction and increase sealing.

  •               Honed and coated tube ID.

  •               Shim technology.

  •               High flow linear piston design and SRT piston.

  •               Ring grooves cut for coil over kits.

  •               Can be non or base valve shock.

Shock Valving:

We will need to change the way we think about shocks and how it effects our car, and we will need to tune more on this shock over the next few seasons to see how we can improve it. Current configuration is in one bleed zone and one bump zone. We will need to know where the bleed zone will ends, to determine this we will need to know center to center at ride height and center to center at full travel. Full travel is where the car runs on the right front and not where the travel indicator is showing. Free zone can be at the top of the shocks travel or at the bottom.

1512 T3 Shock (can be done in a 15 Series Shock)


See Above

2512 Series Gas Shock -                 $450.00

2512 Series Gas Shock - SRT -       $500.00

Update: If you want a lot of drive and a car that will turn this is the only way to get that, because of the two zone.


309 views0 comments

Recent Posts

See All


bottom of page